Lubrina 2 automatically performs maintenance (lubrication and cleaning) of handpieces which are essential for daily practice. Because the lubrication amount and service time suitable for each handpiece are programmed into Lubrina 2, it can automatically perform maintenance of up to four handpieces in a short time. The clean air-blow system implements lubrication and cleaning of the inside of the handpiece thoroughly, and provides stable maintenance without variations by staff which can occur during manual lubrication. Lubrina 2 accepts multiple brands of spray lubricant.
- Air-blow system can remove residual water completely using clean air
- Cleans one turbine in approximately 20 seconds
- Oil usage amount is reduced to 1/4 compared to manual lubrication
- Faster maintenance with excellent cost savings
- Water removal process removes water in the head prior to lubrication
- After lubrication, the surplus oil is effectively removed by clean air
Includes:
- Oil absorption pad
- Oil absorption sheet
- Oil absorption sheet for front door
- Sheet stopper for door
- Power supply cord
- Air tube
- Spray Holders (standard) x 2 (for Morita Multi Spray)
* Please note that Lubrina 2 is not provided with couplings.
- Air-blow system can remove residual water completely using clean air
- Cleans one turbine in approximately 20 seconds
- Oil usage amount is reduced to 1/4 compared to manual lubrication
- Faster maintenance with excellent cost savings
- Water removal process removes water in the head prior to lubrication
- After lubrication, the surplus oil is effectively removed by clean air
Includes:
- Oil absorption pad
- Oil absorption sheet
- Oil absorption sheet for front door
- Sheet stopper for door
- Power supply cord
- Air tube
- Spray Holders (standard) x 2 (for Morita Multi Spray)
* Please note that Lubrina 2 is not provided with couplings.
